TomaGold Borehole EM Survey Confirms Berrigan Deep Zone

1 hour ago 2
 TomaGold's borehole EM survey confirms Berrigan Deep ZoneFigure 1: TomaGold's borehole EM survey confirms Berrigan Deep Zone Business Wire

Article content

Survey also validates significant mineralization and unlocks new targets

Financial Post

THIS CONTENT IS RESERVED FOR SUBSCRIBERS ONLY

Subscribe now to read the latest news in your city and across Canada.

  • Exclusive articles from Barbara Shecter, Joe O'Connor, Gabriel Friedman, and others.
  • Daily content from Financial Times, the world's leading global business publication.
  • Unlimited online access to read articles from Financial Post, National Post and 15 news sites across Canada with one account.
  • National Post ePaper, an electronic replica of the print edition to view on any device, share and comment on.
  • Daily puzzles, including the New York Times Crossword.

SUBSCRIBE TO UNLOCK MORE ARTICLES

Subscribe now to read the latest news in your city and across Canada.

  • Exclusive articles from Barbara Shecter, Joe O'Connor, Gabriel Friedman and others.
  • Daily content from Financial Times, the world's leading global business publication.
  • Unlimited online access to read articles from Financial Post, National Post and 15 news sites across Canada with one account.
  • National Post ePaper, an electronic replica of the print edition to view on any device, share and comment on.
  • Daily puzzles, including the New York Times Crossword.

REGISTER / SIGN IN TO UNLOCK MORE ARTICLES

Create an account or sign in to continue with your reading experience.

  • Access articles from across Canada with one account.
  • Share your thoughts and join the conversation in the comments.
  • Enjoy additional articles per month.
  • Get email updates from your favourite authors.

THIS ARTICLE IS FREE TO READ REGISTER TO UNLOCK.

Create an account or sign in to continue with your reading experience.

  • Access articles from across Canada with one account
  • Share your thoughts and join the conversation in the comments
  • Enjoy additional articles per month
  • Get email updates from your favourite authors

Sign In or Create an Account

or

Article content

Highlights

Article content

Article content

  • Direct correlation with mineralization: The modeled geophysical plates explain the presence of semi-massive to massive sulfides intersected in holes TOM-25-009 to TOM-25-015.
  • Priority target BER-14C: Identification of a major 160 x 300 m plate, open at depth and to the northeast, suggesting the presence of a significant massive sulfide lens near drill hole TOM-25-014.
  • Confirmation of Berrigan Deep: The TOM-25-015 drill hole perfectly intersects the southeast extension of the BER-14C plate, validating the continuity of the mineralized system at a depth of over 450 metres.

Article content

Article content

MONTREAL — TOMAGOLD CORPORATION (TSXV: LOT; OTCPK: TOGOF) (“TomaGold” or the “Company”) is pleased to announce the interpretation results of the borehole electromagnetic (BHEM) survey completed on its Berrigan Mine project, located in the Chibougamau mining camp.

Article content

By signing up you consent to receive the above newsletter from Postmedia Network Inc.

Article content

The survey, conducted by Abitibi Geophysics, modeled ten conductive plates of varying orientation and size that not only corroborate the high-grade intersections already announced, but also indicate significant extension potential, particularly with the discovery of the Berrigan Deep zone.

Article content

David Grondin, President and CEO of TomaGold, stated: “The geophysics confirm what our drill cores indicated: Berrigan Mine sits on a large-scale mineralized system. The BER-14C plate, in particular, extends the mineralization signature of holes TOM-25-014 and TOM-25-015 with a vector pointing to an even more conductive zone to the northeast.”

Article content

Technical analysis of the plates

Article content

The survey uses Terrascope PRO5U transmitters (up to 15 kW) powered by a Wildcat generator to transmit a bipolar signal in a 530 x 560 m surface loop with a current of 30 A. The borehole measurements are taken at frequencies of 5 Hz and 1 Hz using a GPS-synchronized DigiAtlantis triaxial probe, which captures the components of the magnetic field. Finally, the data is processed and modeled using specialized Maxwell and Oasis Montaj software, with the conductive plates shown in green in Figure 1.

Article content

Table 1: Comparative analyses Drilling/BHEM

Article content

Sector / Drill hole

Intersection (base interval)

Geophysical plate

Conductance (S)

Plate dimensions (m)

Berrigan Deep (TOM-25-015)

1.98% Zn, 0.82 Au g/t and 3.21 Ag g/t over 98.50 m

BER-14C

5000

160×300

West Extension (TOM-25-014)

4.55% Zn, 4.94 Au g/t and 56.44 Ag g/t over 2.10 m

TOM-25-014_B

5000

85×90

Main Zone (TOM-25-009)

1.40% Zn, 1.12 Au g/t and 7.55 Ag g/t over 48.05 m

TOM-25-009_C

4000

40×40

North Zone (TOM-25-012/13)

Results pending

TOM-25-12+13_A

1900

70×220

Article content

Source: Rapport technique d’Abitibi Géophysique (25QC084-BT TomaGold, Berrigan, BHEM, 2026)

Article content

Note: TomaGold has reverted to reporting elemental assay results rather than metal equivalent grades. The mineralization style encountered at Berrigan Mine differs from typical sulphide deposits in the surrounding area, including Scott Lake, Lemoine and Mattagami, as well as outside the immediate region such as Normétal, Rouyn-Noranda and Timmins. As a result, metallurgical recovery assumptions remain uncertain at this stage and cannot currently support the use of metal equivalent calculations.

Article content

Article content

Next Steps

Article content

TomaGold plans to:

Article content

  1. Drill three new holes (TOM-26-016 to TOM-26-018) to test the northeast and depth extensions of the BER-14C conductive plate.
  2. Conduct additional follow-up drilling to extend holes TOM-25-010, 011, and 013 with the goal of reaching modeled targets, and drill a corner hole from hole TOM-25-015.
  3. Conduct a low-frequency surface electromagnetic (EM) survey to better define the thickness, continuity, and lateral extent of the mineralized system.

Article content

About the Berrigan Mine Project

Article content

The Berrigan Mine property consists of 16 claims totalling 483 hectares located 4 km north-northwest of the town of Chibougamau. TomaGold has an option to acquire 100% of the property from Chibougamau Independent Mines Inc.

Article content

The property has been the subject of more than one historical estimate. Met-Chem Canada Inc. prepared the most recent of these in April 2001 in a report titled: “Pre-feasibility study: Etude Conceptuelle, Projects Berrigan and Tortigny” by Chuinard et al. In the report, a resource estimate completed using polygonal estimation techniques stated 1.39 Mt grading 3.17% Zn and 1.77 g/t Au on the main Berrigan Mine zone. No resource classifications were given for the resource (GM61359).

Article content

The mineral resource estimate presented above is historical in nature and was not prepared in accordance with National Instrument 43-101 standards. Accordingly, the reader is cautioned not to rely on this estimate, as the Company is not treating the estimate as a current mineral resource. The qualified person has not done sufficient work to make the resource current. Substantial data compilation, verification, and, potentially, additional drilling and resampling would be required by a qualified person before the historical estimate could be classified as a current mineral resource. There can be no assurance that any portion of the historical mineral resource will ultimately be confirmed or demonstrated to be economically viable. For further information regarding the Berrigan Mine Project, please consult the press release dated September 13, 2023.

Article content

Technical Disclosure

Article content

The drilling program was managed by Explo-Logik of Val-d’Or, Québec. Drill core was split in half, with one half submitted to AGAT Laboratories at Val-d’Or for analysis. Gold was analyzed by fire assay (50 g) with atomic absorption finish, while base metals were analyzed by four-acid digestion with ICP-OES finish. Samples with gold grades greater than 10 g/t are reprocessed using metallic screening with a 106 µm cutoff. The processed material is split and analyzed by fire assay with ICP-OES finish to extinction. A separate split is prepared to independently analyze mineralized intervals with a target grade greater than 1.00% Cu-Zn using a Na₂O₂ fusion with ICP-OES or ICP-MS finish. Sample preparation duplicates, certified reference standards, and blanks are inserted into the sample stream.

Read Entire Article