Riverside Resources Intersects Near-Surface Gold and Base Metal Mineralization at Union Norte and Advances Multiple Targets for Phase 2B Drilling

Drill Collar Location Map - 2025-2026 Drill Program. The figure illustrates the collar locations for both 2025 and 2026. The 7 drill holes reported in this news release are in green. Section lines correspond to drill cross-sections presented in Figures 2, 3, and 4. Collar coordinates are summarized in Table 2 GNW

Article content

VANCOUVER, British Columbia, Sept. 09, 2026 (GLOBE NEWSWIRE) — Riverside Resources Inc. (“Riverside” or the “Company”) (TSX-V: RRI) (OTCQB: RVSDF) (FSE: 5YY0), is pleased to report the assay results from the Phase 2A summer 2026 core drilling campaign following up on the high-grade gold-zinc mineralization and successful Phase 1 drilling of late last year. The Phase 2A drill program at the Union Project in northwest Sonora, Mexico has again intersected gold and base metals, continuing to expand upon the carbonate hosted replacement deposits (CRD) associated with past mining while also delivering success at new targets and advancing district-wide targeting. The exploration work is being carried out by Riverside in partnership with Questcorp Mining Inc. (CSE: QQQ), who is earning into the project through an option agreement (see news release, May 6, 2025). The success from this part of the program, which included core drilling, can now be expanded upon when Phase 2B drilling resumes following the seasonal break for the monsoon rainy season, which typically wraps up toward the end of September. These results confirm two main target areas. The program will continue drilling these areas, along with sediment-hosted gold targets at Luis Hill and vein targets at the Jabali area. Union and Union Norte drill results are summarized below, with further drilling planned for the Phase 2B drill campaign.

Article content

Article content

Phase 2A Highlights

Article content

Article content

Article content

An initial 7 holes were drilled with positive drill intercepts at the Union Mine and Union Norte areas (Figure 1) comprising Phase 2A which will then be next followed with Phase 2B after monsoon season ends in early October 2026.

Article content

Article content

Article content

“Working with our partner Questcorp, we are pleased with the positive results from the initial part of Phase 2 drilling, and we look forward to further drilling once the rainy season ends. Grades above 0.5 g/t are significant, as mines in the region produce at this grade or higher. We see high grades in old workings, at surface, and in targets within the CRD-style and sediment-hosted bulk gold-style mineralization. Consistent near-surface intercepts are encouraging, with grades similar to those at nearby operations near Union. The positive results at the Union and Union Norte targets build on our last drill campaign, and we can now move to Phase 2B drilling at these areas, as well as additional locations outlined in the exploration program,” said John-Mark Staude, CEO of Riverside Resources.

Article content

Article content

Article content

Article content

Figure 1. Drill Collar Location Map – 2025-2026 Drill Program. The figure illustrates the collar locations for both 2025 and 2026. The 7 drill holes reported in this news release are in green. Section lines correspond to drill cross-sections presented in Figures 2, 3, and 4. Collar coordinates are summarized in Table 2

Article content

Phase 2A Drill Results

Article content

Union Norte Target

Article content

The Union Norte Target is located 1.5 km north of Union Mine (Figure 1), where recent underground sampling returned 20.2 g/t Au and 226 g/t Ag with 2.7% Zn over a 30 m channel at the Union Mine (see news release, January 22, 2026).

Article content

UND26-014 and UND26-015 were designed to test the NNW-trending feeder structure identified through surface sampling, which returned values from 4.0 to 9.0 g/t Au with anomalous Pb and Zn. Both drill holes intercepted the structure at shallow depth, with UND26-015 returning 14.60 m of 0.45 g/t Au Eq from 1.0 m and UND26-014 returning 9.10 m of 0.76 g/t Au Eq from 1.90 m (Figure 2).

Article content

These results indicate the potential for a larger mineralized system, supported by the continuity of this structure and the host Clemente Formation as a major CRD host lithology, with potential for sediment hosted gold in the reactive shales above and below the CRD host carbonate. Some of the high angle, cross cutting feeder structures, or (“chimneys”), can be projected northward toward the La Negra target, where surface sampling and mineral evidence indicate hydrothermal activity that remains untested by drilling and could fit well within the upcoming drill program.

Article content

Article content

Article content

Article content

Article content

Figure 2: Drill Section (30 m thickness) through the Union Norte Target (looking northwest); section line A-A’ Figure 1.

Article content

Table 1: Assay results for UND26-014 and UND26-015 Union Norte

Article content

Article content

Article content

Article content

Union Mine Target

Article content

UND26-013 was collared to test the southward extension of the Sproul manto; a previously mined orebody. The drill hole was successful in finding Pb and Zn mineralization and intercepted the replacement body south of the known artisanal workings. Anomalous Pb (>36 ppm) and Zn (0.1-0.7%) values confirm proximity to the CRD replacement body (Figure 3). Deeper drilling is warranted to intersect the interpreted main feeder structure beneath the Union Mine, where the highest-grade results on the project were obtained (20.2 g/t Au, 226 g/t Ag, 2.7% Zn over 30 m; (see news release, January 22, 2026). Further drilling at the Union target can drill the newly identified IP features including the geologic targets that were progressed during the 2026 exploration work.

Article content

Article content

Article content

Article content

Figure 3: Drill Section (30 m thickness) through the Union Mine Target (looking north); section line B-B’ Figure 1.

Article content

Additional Phase 2A Targets

Article content

Jabali and Luis Hill Targets

Article content

Drill hole UND26-017, drilled southward toward the Jabali target, improved the understanding of the structural controls in this area. Elevated As values (10 – 80 ppm, Figure 4) indicate proximity to a feeder zone similar to those observed at Union Norte and the Union Mine and identified in the drill hole.

Article content

An IP survey at the project included lines at Jabali and Luis Hill with targets delineated as chargeability highs for both areas, particularly at Luis Hill, with the anomaly extending over 1 km along strike and 300 m at depth.  This IP feature at Luis Hill coincides with the sediment-hosted gold mineralization identified in Phase 1 drilling. The anomaly remains open along strike and at depth, significantly expanding the exploration footprint for this target Hole UND26-18 was drilled above the anomaly and terminated prior to reaching the 150 m planned target depth due to complications. Follow up drilling for Jabali and Luis Hill are warranted.

Article content

Article content

Article content

Article content

Figure 4: Drill Section (30 m thickness) through the Jabali Mine (looking northwest); section line C-C’ Figure 1.

Article content

Seven holes totaling 530.1 metres were completed during Phase 2A. Significant faulting within the targeted formations slowed core drilling and limited progress and recovery in several holes. To improve drilling efficiency in these ground conditions, the Company is actively evaluating a reverse-circulation contractor for Phase 2B. The change in drilling method is intended to increase penetration rates and improve access to priority targets while preserving the option to use diamond core where detailed geological information is required.

Article content

Article content

Table 2: Drill Collar Information for Drill Holes

Article content

Article content

Next Steps – Phase 2B

Article content

Drilling has been successful, with the first portion of the Phase 2 program meeting its objectives and delivering positive exploration results at both the Union mine and Union Norte targets. Restarting and continuing drilling at Union is warranted, with multiple targets identified, particularly those building on the recent drilling and geophysics completed at the property.

Article content

General Overview of La Union Project and Drill Coordinates

Article content

The Project is summarized in the published NI 43-101 Technical Report and, more briefly, on the Riverside website. Riverside initially acquired the Project and subsequently consolidated additional inlier mineral claims to build a strong land position. The company then advanced the Project through surface access agreements and drill permitting, making it a turnkey exploration opportunity for the Optionee.

Article content

Article content

At the Project, historical mining by Peñoles Mining Company targeted chimney and manto-style replacement bodies within the upper oxide zones. As a result, the underlying sulfide zones represent immediate drill targets for further exploration.

Article content

The Project features favorable limestone host rocks, an extensive alteration footprint, and multiple small-scale historical workings, with mineralization styles similar to those at the Hermosa Project in southern Arizona. At Hermosa, South32 is advancing mine development after acquiring the project from Arizona Mining for over $400 million, and Hermosa is now considered one of Arizona’s most promising upcoming mining operations.

Article content

At La Union, immediate drill targets offer the potential for significant-scale discoveries. The Project is well positioned for near-term exploration results, with targets that include both oxide and deeper sulfide mineralization.

Article content

Qualified Person & QA/QC

Article content

The scientific and technical data contained in this news release pertaining to the Project was reviewed and approved by Julian Manco, P.Geo, a non-independent qualified person to Riverside Resources Inc., who is responsible for ensuring that the information provided in this news release is accurate and who acts as a “qualified person” under National Instrument 43-101 Standards of Disclosure for Mineral Projects.

Article content

All drill core samples were sawn in half, labeled, and bagged on site. The remaining half-core was retained and securely stored. Numbered security tags were applied to all sample shipments to ensure chain of custody. Samples were submitted to SGS’s analytical facility in Hermosillo, Sonora, Mexico, for sample preparation and analysis. SGS is independent of the Company.

Article content

Analytical methods include fire assay for gold, gravimetric finish for high-grade silver, multi-element ICP digestion, and high-range fusion-ICP for over-limit concentrations.

Article content

The Company’s QAQC program includes certified reference materials (CRMs), field blanks, and field duplicates inserted at regular intervals throughout each sample batch. CRM performance has had no failures yet identified and is evaluated using a Z-score criterion, where Z = (observed − certified value) / standard deviation, with acceptance thresholds of PASS (|Z| ≤ 2), WARNING (2 < |Z| ≤ 3), and FAIL (|Z| > 3). Field duplicate precision is assessed using relative percent difference (RPD), with PASS ≤ 20%, WARNING > 20–30%, and FAIL > 30%. Blanks are evaluated against the gold detection limit, with any result above that threshold flagged for investigation. Results below detection limits are retained as reported and excluded from RPD calculations. No QAQC failures have been found in the batches associated with the results reported herein.

Article content

Article content

About Riverside Resources Inc.

Article content

Riverside is a well-funded exploration company driven by value generation and discovery. The Company has a solid balance sheet with no debt and fewer than 95M shares outstanding with a strong portfolio of gold-silver and copper assets and royalties in North America. Riverside has extensive experience and knowledge operating in Mexico and Canada and leverages its large database to generate a portfolio of prospective mineral properties. Riverside has properties available for option, with information available on the Company’s website at www.rivres.com. 

Article content

ON BEHALF OF RIVERSIDE RESOURCES INC.

Article content

“John-Mark Staude”

Article content

Dr. John-Mark Staude, President & CEO

Article content

For additional information contact:

Article content

Article content

Certain statements in this press release may be considered forward-looking information. These statements can be identified by the use of forward-looking terminology (e.g., “expect”,” estimates”, “intends”, “anticipates”, “believes”, “plans”). Such information involves known and unknown risks — including the risk that the Transaction will not be completed as contemplates, or at all, availability of funds, the results of financing and exploration activities, the interpretation of exploration results and other geological data, or unanticipated costs and expenses and other risks identified by Riverside in its public securities filings that may cause actual events to differ materially from current expectations. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release.

Article content

Article content

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Article content

Photos accompanying this announcement are available at: 

Article content

Article content

Article content

Article content

Article content

Article content

Article content

Article content

Article content

Article content